Starting The Scsiselect Utility; Using Scsiselect Menus - Adaptec ARO-1130SA Installation And Hardware Manual

ARO-1130SA Installation and Hardware Guide
Starting the SCSI Select Utility
To start SCSISelect, press Ctrl-A when the following prompt appears
when you turn on or reboot your server:
Press <Ctrl><A> for SCSISelect (TM) Utility!
The menu that appears displays the options Configure/View Host
Adapter Settings and SCSI Disk Utilities, as shown in Figure 7-1.
Adaptec Array1000xA Family
Adaptec Array1000xA Family at Bus:Channel 00:C
Would you like to configure the PCI device, or run the
SCSI disk utilities? Select the option and press <Enter>.
Press <F5> to switch between color and monochrome modes.
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( * =default)
Using SCSI Select Menus
To select a SCSISelect menu option, move the cursor to the option
with the and
option displays another menu. You can return to the previous menu
at any time by pressing Esc.
To restore the original SCSISelect default values, press F6 from the
Configure/View Host Adapter Settings screen. To toggle the display
between color and monochrome modes, press F5 from the main
SCSISelect screen (this feature does not work on some monitors).
A-2
Options
Configure/View Host Adapter Settings
SCSI Disk Utilities
Figure 7-1. SCSI Select Menu
keys, then press Enter. In some cases, selecting an
SCSISelect(TM) Utility