Table of Contents
Advertisement
ARO-1130SA Installation and Hardware Guide
2
Similar to instructions for the Protocol IPX section, edit the
traptarg.cfg file to specify IP addresses mapped to MAC
addresses for each client PC which is to receive traps using the
TCP/IP network protocol.
3
Start the SNMP agent
a
Load the SNMP agent by entering the following command:
load cio20 [c<string>] [v]
b
The optional parameters are:
c<string>
Load the agent using the SNMP community name contained
in <string>. The default SNMP community name is "public".
v
Load the agent in verbose mode, which will cause debug-
ging information to be sent to the console.
Note:
ing the SNMP agent.
Windows NT
The SNMP agent is automatically installed when you install
Adaptec CI/O Management Software.
There are no command line options for the CI/O SNMP agent; how-
ever, if a file named ciosnmp.vb is placed in the I/O Manager instal-
lation directory, the CI/O SNMP agent will write a debugging trail
to a file named ciosnmp.log in the same directory. It does not matter
what the contents of the ciosnmp.vb file are. The log file will be over-
written each time the NT SNMP agent is restarted. If you have prob-
lems running the SNMP agent, refer to Problems Running SNMP
Agent on Your Windows NT Server on page C-4.
Note:
The I/O Manager must be loaded prior to loading the
SNMP agent.
E-2
The I/O Manager must be loaded prior to load-
Advertisement
Table of Contents
