Adaptec Ci/O Management Software Installation Hints - Adaptec ARO-1130SA Installation And Hardware Manual

Raid option card for pc servers with raidport i or ii

Hide thumbs Also See for ARO-1130SA:

Table of Contents

ARO-1130SA Installation and Hardware Guide

From the NWSETUP Installation menu, select Default

Installation or Custom Installation (press F1 for help).

At the end of the installation process, select Yes when you are

prompted to update the autoexec.ncf file. (This adds the

appropriate NLM command lines to the file so that all software

is automatically loaded when the server starts.)

See the Adaptec CI/O Management Software User's Guide for informa-

tion on using the Adaptec CI/O Management Software to add,

delete, or manage your arrays from your server console.

Adaptec CI/O Management Software Installation Hints

For communications supported over TCP/IP, the tcpip.nlm

must be loaded and the IP protocol must be bound to a valid IP

address. The IP protocol generally needs to be bound to an eth-

ernet frame type, ETHERNET_II, which must be specified

when loading the LAN driver. A LAN driver can be loaded

multiple times for different ethernet frame types.

Command lines similar to the following are automatically

added to the autoexec.ncf file when you run the nwsetup

utility:

# NWSETUP LAST UPDATE XX-XX-XX

RPCSTART

IOMGR.NCF

IOMGRSRV.NCF

IOMGRRPC.NCF

6-8

Table of Contents