Starting The Scsiselect Utility; Using Scsiselect Menus - Adaptec ARO-1130CA Installation And Hardware Manual

Starting the SCSI Select Utility
To start SCSISelect, press Ctrl-A when the following prompt appears
when you turn on or reboot your computer:
Press <Ctrl><A> for SCSISelect (TM) Utility!
The menu that appears displays the options Configure/View Host
Adapter Settings and SCSI Disk Utilities, as shown in Figure 7-1.
Adaptec Array 1000 Family
Adaptec Array 1000 Family at Bus:Channel 00:C
Would you like to configure the PCI device, or run the
SCSI disk utilities? Select the option and press <Enter>.
Press <F5> to switch between color and monochrome modes.
Configure/View Host Adapter Settings
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit ( * =default)
Using SCSI Select Menus
To select a SCSISelect menu option, move the cursor to the option
with the and keys, then press Enter. In some cases, selecting an
option displays another menu. You can return to the previous menu
at any time by pressing Esc.
To restore the original SCSISelect default values, press F6 from the
main SCSISelect screen. To toggle the display between color and
monochrome modes, press F5 from the main SCSISelect screen (this
feature does not work on some monitors).
Configuring the ARO-1130CA with the SCSISelect Utility
SCSISelect(TM)
Options
SCSI Disk Utilities
Figure 7-1. SCSI Select Menu
Utility v2.00
5-3