Installing The Aro-1130Sa - Adaptec ARO-1130SA Installation And Hardware Manual

ARO-1130SA Installation and Hardware Guide

Installing the ARO-1130SA

Follow these steps to install the ARO-1130SA:
Note:
Before installing the ARO-1130SA in an existing server
that already has data, back up all data before continuing.
1
Turn power to the computer, and disconnect the power cord.
OFF
2
Remove the cover from the computer case. (If necessary, refer
to the instructions in your computer documentation.)
3
Locate the PCI/RAIDport I or II expansion slot; unscrew and
remove the expansion slot bracket that covers the card-slot
opening.
4
Insert the ARO-1130SA in the slot; press down firmly so that
the bus contacts are securely seated in the slot. Secure the
adapter bracket with the screw you removed in Step 3, as
shown in Figure 2-3.
Expansion Slot
Bracket Screw
ARO-1130SA Card Bracket
Figure 2-3. Installing the ARO-1130SA in a Typical PCI/RAID port I or II Expansion Slot
2-4
PCI Expansion Slots RAID port I or II Expansion Slot
Bus Contacts