Starting Scsiselect - Adaptec 2940U2W User Manual

SCSI Card 2940U2W User's Reference
Table 1. SCSI Select Settings (Continued)
SCSI Select Option
Send Start Unit Command
BIOS Multiple LUN Support
Include in BIOS Scan
Advanced Host Adapter Settings:
"Plug-and-Play" SCAM Support
Reset SCSI Bus at IC Initialization
Extended BIOS Translation for
2
DOS Drives > 1 GByte
Host Adapter BIOS
Support Removable Disks Under BIOS as
2
Fixed Disks
Display <Ctrl> <A> Messages during BIOS
2
Initialization
BIOS Support for Bootable CD-ROMs
BIOS Support for Int 13 Extensions
1
Setting is valid only if Multiple LUN Support is enabled.
2
Settings are valid only if host adapter BIOS is enabled.
Starting SCSI Select
Follow these steps to start SCSISelect:
1
Turn on or restart your system.
During the startup process, pay careful attention to the mes-
sages that appear on your screen.
2
When the following message appears on your screen, press the
Ctrl-A keys simultaneously (this message appears for only a
few seconds):
Press <Ctrl><A> for SCSISelect (TM) Utility!
3
From the menu that appears, use the
cursor to the option you want to select, then press Enter.
16
Available Settings
Yes, No
Yes, No
Yes, No
Enabled, Disabled
Enabled, Disabled
Enabled, Disabled
Enabled, Disabled
Boot Only,
All Disks, Disabled
Enabled, Disabled
2
Enabled, Disabled
2
Enabled, Disabled
and
Default Setting
Yes (Enabled)
No (Disabled)
Yes (Enabled)
Disabled
Enabled
Enabled
Enabled
Boot Only
Enabled
Enabled
Enabled
keys to move the