Creating The First Array With The Array Config Sa; Utility - Adaptec ARO-1130SA Installation And Hardware Manual

Creating the First Array
With the ArrayConfigSA

Utility

This chapter explains how to use the ArrayConfigSA Utility to create
the first bootable or non-bootable array on your server.
Before creating the array, make sure the disks for the array are con-
nected and installed in your server (or array enclosure).
Note:
ArrayConfigSA runs from a self-booting diskette. If
you are changing the configuration of a server that is
already in use on a network, log all users off the system and
shut it down in an orderly manner before you start
ArrayConfigSA.
Refer to the Adaptec CI/O Management Software User's Guide for addi-
tional information.
4
4-1