Installation Overview - Adaptec ARO-1130SA Installation And Hardware Manual

Installation Overview

To install ARO-1130SA hardware and software, follow these steps:
1
Locate the PCI /RAIDport I or II expansion slot on the mother-
board. (Chapter 2)
2
Install the ARO-1130SA into the PCI/RAIDport I or II expan-
sion slot. (Chapter 2)
3
Connect any additional SCSI devices to the RAID ready SCSI
connectors on the motherboard.
4
Run the Array1000xA BIOS & Driver Selection Utility.
(Chapter 3)
Note:
containing another Adaptec product, and the
Array1000xA BIOS & Driver Selection Utility
determines you require Disk B of the manager set
driver diskettes, see Appendix B before continuing
with installation.
5
Create the first bootable array using the ArrayConfigSA
Utility. (Chapter 4)
6
Install the Array1000SA driver for your operating system.
(Chapter 5 and Chapter 6)
7
Install the Adaptec CI/O Management Software on your
server. (Chapter 5 and Chapter 6)
8
Install the Adaptec CI/O Management Software on your net-
worked client (optional). (Chapter 7)
Note:
Before proceeding with installation, review the
readme file found on Disk 1 of the Adaptec CI/O Manage-
ment Software for Windows NT diskettes, or the readme file
on the \winnt\disk1 directory of the Adaptec CI/O Manage-
ment Software CD-ROM.
If you plan to install ARO-1130SA in a system
Introduction
™
1-3