Starting Scsiselect; Exiting Scsiselect; Using Scsiselect Settings - Adaptec ULTRA160 User Reference

Adaptec SCSI Card 29160 User's Reference
Starting SCSI Select
Follow these steps to start SCSISelect:
1 Turn on or restart your system.
During the startup process, pay careful attention to the mes-
sages that appear on your screen.
2 When the following message appears on your screen, press the
Ctrl-A keys simultaneously (this message appears for only a
few seconds):
Press <Ctrl><A> for SCSISelect (TM) Utility!
3 From the menu that appears, use the arrow keys to move the
cursor to the option you want to select, then press Enter.
Note:
If you have difficulty viewing the display, press F5 to
toggle between color and monochrome modes. (This feature
may not work on some monitors.)
Exiting SCSI Select
Follow these steps to exit SCSISelect:
1 Press Esc until a message prompts you to exit (if you changed
any settings, you are prompted to save the changes before you
exit).
At the prompt, select Yes to exit, then press any key to reboot
2
the computer. Any changes made in SCSISelect will take effect
the next time the computer is booted.
Using SCSI Select Settings
To select an option, use the arrow keys to move the cursor to the
option, then press Enter.
In some cases, selecting an option displays another menu. You can
return to the previous menu at any time by pressing Esc.
To restore the original SCSISelect default values, press F6 from the
main SCSISelect screen.
18