Installing Aro-1130Sa Hardware - Adaptec ARO-1130SA Installation And Hardware Manual

Installing ARO-1130SA
Hardware
This chapter explains how to install the ARO-1130SA. To install the
ARO-1130SA, you must
Verify presence of DIMM memory
Back up any existing data on drives to be used in array
Install the ARO-1130SA in your server
Note:
If the Array1000xA BIOS & Driver Selection Utility
(Chapter 3) determines you require driver Disk B of the
manager set driver diskettes, see Appendix B, Using the
ARO-1130SA with Other Adaptec Products.
2
2-1