Installing Adaptec Ci/O Management Software - Adaptec ARO-1130SA Installation And Hardware Manual

ARO-1130SA Installation and Hardware Guide

Installing Adaptec CI/O Management Software

Follow these steps to install the software:
Note:
Before you start the Adaptec CI/O Management Soft-
ware, be sure that communication with the server via the net-
work is already established. As long as communication is
established, it is not a requirement to log-on to the server to
install the software and to monitor the server via the network.
(See the documentation provided with your TCP/IP or SPX/
IPX software for instructions on establishing communica-
tions, and also Hints for Establishing Communications With Your
Server on page 7-3.)
1
Start Windows on the client.
2
Insert the Adaptec CI/O Management Software CD-ROM in
your CD-ROM drive. If you are installing the software from
diskettes, insert Disk 1 of the Adaptec CI/O Management Soft-
ware for Windows 95 and Windows NT Clients.
3
Select Run from the File menu (Windows 95 and NT users
select Start, and then Run), type the following and press Enter.
[pathname] setup.exe
(The setup.exe file is located in \win_client\disk1\setup.exe on
the CD-ROM, and in \setup.exe on Disk 1 of the Adaptec CI/O
Management Software for Windows 95, and Windows NT
Clients.)
4
Follow the directions that appear on the screen.
During installation you will be prompted to enter the host name
of the client PC. If you do not know the host name, you can add
the information later by inserting a line in the autoexec.bat file.
Instructions for this step appear on the screen during installation.
See the Adaptec CI/O Management Software User's Guide for informa-
tion on using the Adaptec CI/O Management Software to add,
delete, or manage your arrays from the remote client.
7-2