Table of Contents
Advertisement
Using the SNMP Agent
This appendix provides information on using the SNMP agent for
NetWare and Windows NT. A section describing how to load MIBs
in the MIB database is also provided.
NetWare
1
Modify the traptarg.cfg file which specifies SNMP trap
destinations.
a
Open the traptarg.cfg (sys:\etc\traptarg.cfg) file using any
editor.
b
Scroll down to the Protocol IPX section of the file.
c
For each client PC which is to receive traps using the IPX
network protocol, add a line to the file that includes the IPX
network number (8 digits) and the MAC address (12 digits)
of the client PC. Include a tab character before the IPX
Network Number. For example:
(Tab)00000002:008DAD088E24
When all of the appropriate entries are added, the Protocol
IPX section should look something like the following.
Protocol IPX
00000002:008DAD088E24
00000002:0080AD0761EC
E
E-1
Advertisement
Table of Contents
