Installing Adaptec Ci/O Management Software For Windows Nt Server; Hints For Establishing Communications With Your Server - Adaptec ARO-1130SA Installation And Hardware Manual

Raid option card for pc servers with raidport i or ii

Hide thumbs Also See for ARO-1130SA:

Table of Contents

Installing Adaptec CI/O Management Software

for Windows NT Server

Note:

The Adaptec CI/O Management Software installation

process automatically installs both CI/O server and client

components on your Windows NT Server. Before you start

the Adaptec CI/O Management Software, be sure that com-

munication with the server via the network is already estab-

lished. (See the documentation provided with your TCP/IP

software for instructions on establishing communications,

and also Hints for Establishing Communications With Your

Server on page 7-3.)

Follow these steps to install the Adaptec CI/O Management Soft-

ware for Windows NT:

Start Windows NT.

Insert the Adaptec CI/O Management Software CD-ROM in

your CD-ROM drive. If you are installing the software from

diskettes, insert Disk 1 of the Adaptec CI/O Management Soft-

ware for Windows NT Server in the floppy disk drive.

Select Run from the File menu (Windows NT 4.0 users select

Start, and then Run), type the following and press Enter:

[pathname] setup.exe

(The setup.exe file is located at \win_nt\disk1\setup.exe on the

CD-ROM, and at \setup.exe on Disk 1 of the Adaptec CI/O

Management Software for Windows NT Server.)

Follow the directions that appear on the screen.

When installation is complete, reboot the system. The follow-

ing NT Services start automatically in the background:

CIO Array Management Service

CIOArrayManager RPC Command

CIOArrayManager RPC EventP

CIOArrayManager RPC Event

NobleNet Portmapper

Installing Software on a Windows NT Server

5-5

Table of Contents