Table of Contents
Advertisement
ARO-1130SA Installation and Hardware Guide
Problems Running the Software On Your
Windows NT Server
If the Adaptec CI/O Management Software does not start when you
double-click the program icon and you see a warning box with
Unable to Initialize IOMAPI, try the following:
Verify that the following NT services have a status of Started
(double-click the Services icon in Control Panel). If they do
not, select each service and press the Start button:
CIO Array Management Service
CIOArrayManager RPC Command
CIOArrayManager RPC EventP
CIOArrayManager RPC Event
NobleNet Portmapper
Make sure you have the proper security access rights to the
Windows NT Services. The Windows NT Services can be
started, stopped, paused, etc., by different users (administra-
tors, power users, local users, etc.) according to the NT service
security rules defined by Microsoft (refer to the Windows NT
documentation for more details).
Verify that the Registry was updated correctly during installa-
tion. If the values do not match the values listed below, try
reinstalling the Adaptec CI/O Management Software:
–
The correct entries for HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\Services\
CIOArrayManagement are:
DisplayName: REG_SZ: CIO Array Management
Service (v x.xx)
ErrorControl: REG_DWORD: 0x01
ImagePath: REG_SZ: [Pathname specified during
installation]iomgr.exe
ObjectName: REG_SZ: LocalSystem
Start: REG_DWORD: 0x02
Type: REG_DWORD: 0x110
SharedMemName: REG_SZ: iomgr.shm
C-2
Advertisement
Table of Contents
