Table of Contents
Advertisement
ARO-1130SA Installation and Hardware Guide
Completing the Installation
Once the ARO-1130SA is installed in your server, refer to the docu-
mentation that came with your computer and SCSI devices for spe-
cific instructions on setting up your SCSI devices and connecting
them to the SCSI connectors on the motherboard.
Note:
If you refer to the computer's documentation for
installation instructions, be sure to return to this document
for instructions on running the Array1000xA BIOS & Driver
Selection Utility and installing the software included in the
package.
In most cases, it is not necessary to run the SCSISelect
Should you need to configure SCSI options (e.g., ID, Parity Check-
ing, and Termination), see Appendix A, Configuring ARO-1130SA
with the SCSISelect Utility.
2-6
®
utility.
Advertisement
Table of Contents
