Table of Contents
Advertisement
4
Insert the appropriate Adaptec Array1000xA Family Manager
Set driver diskette (Disk A or Disk B) into your floppy disk
drive. (See Running the Array1000xA BIOS & Driver Selection
Utility on page 3-2 to determine the appropriate driver
diskette.)
5
Press F3 and specify the path to the cda1000.dsk driver. For
NetWare 4.1, the driver is located in \netware\v4_1x on the
diskette.
6
Select cda1000.dsk and press Enter.
7
When prompted to save the current version of aspitran.dsk ,
select Yes or No.
8
When prompted to save the current version of nwpaload.nlm ,
select Yes or No.
9
When the message File "A:\netware\v4_1x\nwpaload.nlm was
not found..." appears, ignore the message and press Enter to
continue.
10
Select Continue copying the next file.
11
Select Yes to install an additional disk driver.
12
Select aspicd.dsk and press Enter.
13
When prompted to so save current version of aspicd.dsk , select
No.
14
When prompted to so save current version of aspicd.ddi , select
No.
15
Select No when prompted to install an additional disk driver.
16
Select Continue Installation.
17
Press Enter to continue.
18
Down and exit the server. At the DOS prompt, copy the
nwpa.nlm , nbi.nlm , and nwpaload.nlm files (located on the
Novell Installation CD-ROM) to the server's startup directory
(usually c:\nwserver ).
Installing Software on a Novell NetWare Server
6-3
Advertisement
Table of Contents
