Figure 3-12: Mount The Chassis - Acnodes PC 5170 User Manual

PC 5170 Flat Panel PC

Figure 3-12: Mount the Chassis

Step 9: Secure the panel PC with the wall-mounting kit. To do this, stick the protective
cushion to the wall-mounting kit first. Then, put the wall-mounting kit on the top
panel of the panel PC. Carefully mark the location of the wall-mounting kit screw
holes on the wall. Drill a pilot hole at the marked location on the wall. Secure the
wall-mounting kit to the wall by inserting a retention screw into the pilot hole on
the wall (Figure 3-13). This step is to avoid the panel PC being pushed apart
from the wall-mounting bracket accidentally. Step 0:
Page 60 ACNODES ® Corp.