Table of Contents
Advertisement
transfers of up to 64 KB per interrupt.
179 PIO Mode: Indicates the PIO mode of the installed device.
180 S.M.A.R.T.: Indicates whether or not the Self-Monitoring Analysis and
Reporting Technology protocol is supported.
181 32Bit Data Transfer: Enables 32-bit data transfer.
Î
Type [Auto]
Use the Type BIOS option select the type of device the AMIBIOS attempts to boot from
after the Power-On Self-Test (POST) is complete.
Î
Not Installed
Î
Auto
Î
CD/DVD
Î
ARMD
Î
LBA/Large Mode [Auto]
Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (Logical
Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the
maximum drive capacity is 137 GB.
Page 94
BIOS is prevented from searching for an IDE disk
drive on the specified channel.
The BIOS auto detects the IDE disk drive type
D
EFAULT
attached to the specified channel. This setting should
be used if an IDE hard disk drive is attached to the
specified channel.
The CD/DVD option specifies that an IDE CD-ROM
drive is attached to the specified IDE channel. The
BIOS does not attempt to search for other types of
IDE disk drives on the specified channel.
This option specifies an ATAPI Removable Media
Device. These include, but are not limited to:
Î
ZIP
Î
LS-120
PC 5170 Flat Panel PC
ACNODES ® Corp.
Advertisement
Chapters
Table of Contents
