19-inch sunlight readable touch panel pc, 19-inch core 2 duo 1280x1024 sunlight readable touch panel pc (7 pages)
Summary of Contents for Acnodes PCM8210
Page 1
5th Gen. Core i5 5200U 2.2GHz CPU Full IP67 Rated Enclosure User Manual All rights reserved. Product description and product specifications are subject to change without notice. For lastest product information, please visit Acnodes’ website at www.acnodes.com 14628 Central Ave. Chino, CA91710 Tel: 909.597.7588 Fax: 909.597.1939...
IMPORTANT SAFETY INSTRUCTIONS Please read these instructions carefully before using the product and save for later reference. Follow all warnings and instructions marked on the product. Our military devices complied to ITAR – FREE for import/export to US territory. All products comply to ROHS and REACH regulation. No halogen or toxic metal contains or generated toxic material in use.
CAUTION Read manual prior to installing the product. The operation of products depends on you reading and following the information in this manual. Re-check your work prior to operating the product. EVENT EFFECT PREVENTION Sunlight shines directly will You should avoid placing the cause the panel damage.
1. Getting Started 1.1. About the Rugged display This rugged product adopts a high quality TFT LCD panel. (Options for high brightness, optical bonding features.) It is designed to fit to the harsh environment and requirements of today’s business in the heavy duty / military applications.
1. Input / Output Overview 1.1. For Non-Military Connectors The default output signal is VGA for the main display and S-Video for PIP display. The LCD output can be configured to use any of the available input formats (VGA, DVI, S-Video, and Composite).
1.3. Military (D38999) Type Type A: Connectors at down side The default signal is VGA (J2) and power input (J1) J1: Power Input (D38999/24WA98PN) Wide Range DC Input is default definition in military LCD monitors, connect the power cord to the DC outlet, and connect the power to the monitor through pins as below J1 Power A VCC+...
Page 8
Type B: Connectors at Rear side J1: Power Input (D38999/24WA98PN) Wide Range DC Input is default definition in military LCD monitors, connect the power cord to the DC outlet, and connect the power to the monitor through pins as below J1 Power A VCC+ B VCC-...
2. Using the LCD Monitor 2.1. OSD Key Definition There are two types OSD keypad, Type A Type B POWER Initiates power-up sequence from low power mode or enters low power mode from normal operation. AUTO Perform Auto Adjustment Esc (EXIT) i.
iv. Selects the previous item in the Menu. DOWN v. Selects the next item in the Menu. 2.2. OSD Hot Keys (Auto) Function Hot Key “ ” to select the main source Main source Press “ ” to the volume bar, and press “ ” “ ” Volume Press to adjust...
Page 11
*VGA CHANNEL ONLY “ ” or “ ” Adjusts the ADC brightness. Press to adjust. COLOR TEMPERATURE USER/6500K/9300K Adjusts the color temperature of the entire screen. A low color temperature will make The screen reddish. A high color temperature will make the screen bluish. R slider bar G slider bar B slider bar...
Page 12
2.3.2. Adjust AUTO SETUP PRESS YES TO AUTO SETUP *VGA CHANNEL ONLY Automatically adjusts screen size, H position, V position, Clock, Clock Phase AUTO ADJUSTMENT ON/OFF *VGA CHANNEL ONLY H Position, V Position and Clock Phase are adjusted automatically upon power on. H POSITION slider bar *VGA CHANNEL ONLY...
Page 13
2.3.3. Audio VOLUME slider bar Audio Input slider bar MUTE ON/OFF AUDIO RESET YES/NO Resets “AUDIO” settings back to factory settings. 2.3.4. PIP (Picture in picture) PIP SOURCE Composite S-Video @OFF @LARGE PIP PIP MODE @SMALL PIP @SIDE BY SIDE ASPECT @SIDE BY SIDE FULL Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode.
Page 14
2.3.5. OSD settings OSD TURN OFF slider bar Turns off the OSD after a period of inactivity. The preset choices are 0-60 seconds. H - slider bar OSD POSITION V - slider bar Determines the location where the OSD appears on the screen. @OFF OSD TRANSPARENCY @TYPE1...
3. Cleaning the Monitor 1. Make sure the monitor is turned off. 2. Never spray or pour any liquid directly on the screen or case. 3. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 4.
5. Troubleshooting If your monitor fails to operate correctly, consult the following chart for possible solution before calling for repairs: Condition Check Point 1. The picture does not Check if the signal cable is firmly seated in the socket. appear ...