Acnodes PC 5170 User Manual page 103

Î
Disabled
Î
378
Î
278
Î
3BC
Î
Parallel Port Mode [Normal]
Use the Parallel Port Mode option to select the mode the parallel port operates in.
Î
Normal
Î
EPP
Î
ECP
Î
EPP+ECP
Î
Parallel Port IRQ [IRQ7]
Use the Parallel Port IRQ selection to set the parallel port interrupt address.
Page 100
No base address is assigned to the Parallel Port
Parallel Port I/O port address is 378
D
EFAULT
Parallel Port I/O port address is 278
Parallel Port I/O port address is 3BC
The normal parallel port mode is the standard mode
D
EFAULT
for parallel port operation.
The parallel port operates in the enhanced parallel
port mode (EPP). The EPP mode supports
bi-directional communication between the system
and the parallel port device and the transmission
rates between the two are much faster than the
Normal mode.
The parallel port
capabilities port (ECP) mode. The ECP mode
supports bi-directional communication between the
system and the parallel port device and the
transmission rates between the two are much faster
than the Normal mode
The parallel port is also be compatible with EPP and
ECP devices
PC 5170 Flat Panel PC
operates in the extended
ACNODES ® Corp.