Acnodes PC 5170 User Manual page 185

Figure D-5: Install PS/2 Interface Driver
The user is then prompted to ensure the touch monitor or the USB for the touch
Step 9:
controller is plugged into the system (Figure D-6). Once the touch controller is
plugged into the system, click OK.
Figure D-6: Touch Monitor/USB Touch Controller Confirmation
Step 10: The user is then prompted to select a file directory in which the touch kit
controller is installed (Figure D-7). The default directory is "C:\Program
Files\TouchKit." If a different folder must be used, select browse and then
select the folder. Once the folder is selected, click Next to continue.
Page 180
PC 5170 Flat Panel PC
ACNODES ® Corp.