External Peripheral Interface Connectors; Lcd Panel Connection; Figure 3-19: Install Into A Rack/Cabinet - Acnodes PC 5170 User Manual

Figure 3-19: Install into a Rack/Cabinet

Step 6: Once the PC 5170 flat panel PC with the attached rack/cabinet bracket has been
properly inserted into the rack/cabinet, secure the front of the rack/cabinet
bracket to the front of the rack/cabinet (Figure 3-19). Step 0:

3.8 External Peripheral Interface Connectors

3.8.1 LCD Panel Connection

A conventional CRT VGA 15-pin female D-SUB connector is located on the bottom panel
to connect the PC 5170 flat panel PC to a second monitor.
NOTE:
To use the dual screen option, please configure this option in the Intel® Extreme
Graphics configuration settings. To do this, open the Control Panel, locate the
Intel® Extreme Graphics icon and click on it. Once opened, an option for Multiple
Display is available. Select this option and select notebook as the primary device.
Page 66
PC 5170 Flat Panel PC
ACNODES ® Corp.