5.3.4 Super IO Configuration
Use the Super IO Configuration menu (BIOS Menu 7) to set or change the configurations
for the FDD controllers, parallel ports and serial ports.
BIOS Menu 7: Super IO Configuration
Î
On Board Floppy Controller [Enabled]
Î
Disabled
Î
Enabled
Î
Serial Port1 Address [3F8/IRQ4]
Use the Serial Port1 Address option to select the Serial Port 1 base address.
Î
Disabled
Page 98
Allows BIOS to disable the floppy controller
Allows BIOS to enable the floppy controller
D
EFAULT
No base address is assigned to Serial Port 1
PC 5170 Flat Panel PC
ACNODES ® Corp.