Acnodes PC 5170 User Manual page 172

NOTE:
The power from PW1 should support at least a 6.5A current for the P4 CPU. If
the power output is too low, the CPU may not function normally. Be sure the
power from the power supply is sufficient, and don't share this power with other
devices, such as hard disk etc. Use ACNODES's special ATX power connector
cable for connection to a power supply if the power supply doesn't have a
suitable ATX connector cable.
B.19 Internal Switches and Indicators
S2: Reset Switch
PIN Description
1 Reset
B.20 Serial ATA Connector
The EMBEDDED provides two Serial ATA (SATA) ports.
SATA1, SATA2: Serial ATA Connector
PIN Description
1 S_TXP
2 S_TXN
Page 168
PIN Description
2 GND
PIN Description
3 S_RXN
4 S_RXP
PC 5170 Flat Panel PC
ACNODES ® Corp.