PC 5170 flat panel PC. The PC 5170 flat panel PC arm mount retention
screw holes are shown in Figure 3-17.
Figure 3-17: Arm Mount Retention Screw Holes
Secure the PC 5170 to the interface pad by inserting four retention screws
Step 4:
through the mounting arm interface pad and into the PC 5170 flat panel PC.
3.7.4 Cabinet and Rack Installation
The PC 5170 flat panel PC can be installed into a cabinet or rack. To do this, please
follow the steps below.
The back of the metal frame surrounding the PC 5170 flat panel PC has
Step 1:
several retention screw holes for a cabinet/rack installation bracket.
NOTE:
When purchasing a cabinet/rack installation bracket, make sure it is
compatible with both the PC 5170 flat panel PC and the cabinet/rack into
which the PC 5170 flat panel PC is installed.
Slide the PC 5170 through the cabinet/rack bracket until the rear side of the
Step 2:
PC 5170 frame is flush against the front of the bracket.
Page 64
PC 5170 Flat Panel PC
ACNODES ® Corp.
Step 0: