Acnodes PC 5170 User Manual page 138

Î
Restore on AC Power Loss [Last State]
Use the Restore on AC Power Loss option to specify what state the system returns to if
there is a sudden loss of power to the system.
Î
Power Off
Î
Power On
Î
Last State D
Î
Resume on Ring/LAN [Disabled]
The Resume on Ring/LAN BIOS option specifies if the system will be roused from a
suspended or standby state when there is activity on the RI (ring in) modem line. That is,
the system will be roused by an incoming call on a modem.
Î
Disabled D
Î
Enabled
Î
Resume on PME# [Disabled]
The Resume on PME# BIOS option specifies if the system will be roused from a
suspended or standby state when there is activity on the PCI PME (power management
event) controller.
Î
Disabled D
Î
Enabled
Î
Resume On RTC Alarm [Disabled]
Use the Resume On RTC Alarm option to specify the time the system should be roused
from a suspended state.
The system remains turned off
The system turns on
The system returns to its previous state. If it was on, it
EFAULT
turns itself on. If it was off, it remains off.
Wake event not generated by an incoming call
EFAULT
Wake event generated by an incoming call
Wake event not generated by PCI PME controller
EFAULT
activity
Wake event generated by PCI PME controller activity
PC 5170 Flat Panel PC
Page 135