Coolant Level Inspection - Triumph Street Triple S Owner's Handbook Manual

Maintenance
Note:
• HD4X Hybrid
supplied by Triumph, is premixed
and does not need to be diluted
prior to filling or topping up the
cooling system.
To protect the cooling system from
corrosion, the use of corrosion inhibitor
chemicals in the coolant is essential.
If coolant containing
inhibitor is not used, the cooling system
will accumulate rust and scale in the
water jacket and radiator. This will block
the coolant passages, and considerably
reduce the efficiency of the cooling
system.
134
OAT coolant, as
a corrosion

Coolant Level Inspection

Note:
• The coolant level should be checked
when the engine is cold (at room or
ambient temperature).
2
cjxo
1. Expansion tank
2. Filler cap
3. MAX mark
4. MIN mark
Position the motorcycle on level ground
and in an upright
expansion tank can be viewed from the
left hand side of the motorcycle, below
and towards the front of the fuel tank.
Check the coolant level in the expansion
tank. The coolant level must be between
the MAX and MIN marks. If the coolant
is below the minimum level, the coolant
level must be adjusted.
1
3
4
position. The