Selecting A Riding Mode - Motorcycle Stationary - Triumph Street Triple S Owner's Handbook Manual

Instruments
Selecting a Riding Mode –
Motorcycle Stationary
Press and release the MODE button on
the left handlebar switch housing until
the desired riding mode is flashing in
the display.
1. Selected riding mode (flashing)
2. Current (active) riding mode
Note:
• The selected
automatically activated one second
after the MODE button is pressed, if
the following conditions are met:
With the Engine Off
• The ignition is switched ON
• The engine stop switch is in the
RUN position.
With the Engine Running
• Neutral gear is selected or the
clutch is pulled in.
74
1
2
riding mode is
Once the MAP, ABS and TTC settings
have changed, the selected riding mode
will be displayed and the previous mode
will no longer be shown.
1. Selected riding mode
1