Rear Brake Wear Inspection - Triumph Street Triple S Owner's Handbook Manual

Rear Brake Wear inspection

If the lining thickness of any pad is less
than that specified in the table, replace
all the pads on the wheel.
Warning
If fitting new proprietary brand brake
pads, check that the carrier plate of
the brake pad is the specified thickness
shown in the table.
Fitting brake pads with the carrier plate
less than the specified thickness may
result in brake failure due to the
possible loss of the brake pad as it
wears.
Model Carrier
plate
minimum
thickness
All models 3.0 mm
Minimum Minimum
lining service
thickness thickness
(lining and
carrier
plate)
1.5 mm 4.5 mm
Brake pads supplied by Triumph will
have the carrier
recommended thickness. Always have
replacement brake pads supplied and
fitted by your Triumph dealer.
1
1. Carrier plate
2. Brake pad lining
Maintenance
plate at the
2
143