Instruments
Warning Lights
Engine Management System
Malfunction Indicator Light (MIL)
The Malfunction Indicator Light
(MIL)
for
the
system illuminates when the ignition is
switched ON (to indicate that it is
working)
but
should
illuminated when the engine is running.
If the MIL becomes illuminated when the
engine is running, this indicates that a
fault has occurred in one or more of the
systems
controlled
management
system.
circumstances, the engine management
system will switch to 'limp-home' mode
so that the journey may be completed, if
the fault is not so severe that the engine
will not run.
Warning
Reduce speed and do not continue to
ride for longer than is necessary with
the MIL illuminated. The fault may
adversely affect engine performance,
exhaust emissions and fuel consump-
tion.
Reduced
could
cause
a
condition, leading to loss of control and
an accident. Contact an authorised
Triumph dealer as soon as possible to
have the fault checked and rectified.
58
engine
management
not
become
by
the
engine
In
engine
performance
dangerous
riding
Note:
•
If the MIL flashes when the ignition is
switched ON contact an authorised
Triumph dealer as soon as possible to
have the situation rectified. In these
circumstances the engine will not
start.
Low Oil Pressure Warning Light
With the engine running, if the
engine oil pressure becomes dangerously
low, the low oil pressure warning light will
illuminate.
such
Stop the engine immediately if the low
oil pressure warning light illuminates.
Do not restart the engine until the
fault has been rectified.
Severe engine damage will result from
running the engine when the low oil
pressure warning light is illuminated.
Note:
•
The low oil pressure warning light
will illuminate if the ignition is
switched ON without running the
engine.
Caution
Need help?
Do you have a question about the Street Triple S and is the answer not in the manual?