Triumph Street Triple S Owner's Handbook Manual page 89

Hide thumbs Also See for Street Triple S:
Table of Contents

Advertisement

Auto
The self-cancelling function is on.
The indicators will activate for eight
seconds plus an additional 65 meters.
Note:
If the motorcycle stops for any
reason the indicators will flash for
the remainder of the time and
distance unless manually cancelled
by the rider.
Daytime Running Lights (DRL)
When the ignition is switched
ON and the daytime running lights
switch is set to DAYTIME RUNNING
LIGHTS, the daytime running lights
warning light will illuminate.
The daytime running lights and low
beam headlights are operated manually
using a switch on the left hand switch
housing, see page 88.
Warning
Do not ride for longer than necessary
in poor ambient light conditions with
the Daytime Running Lights (DRL) in
use.
Riding
with
the
Lights when dark, in tunnels or where
poor ambient light is apparent may
reduce the riders vision or dazzle other
road users.
Dazzling other road users or reduced
vision in low ambient light levels may
result in loss of motorcycle control and
an accident.
Daytime
Running
General Information
Note:
During daylight hours the Daytime
Running Lights improve the motor-
cycles visibility to other road users.
Low beam headlights must be used
in any other conditions unless the
road conditions allow for high beam
headlights to be used.
High Beam Button
If the DAYTIME RUNNING LIGHT (DRL)
switch is in the dip beam position, when
the HIGH BEAM button is operated the
high beam will be switched on. Each
press of the button will swap between
dip and high beam.
If the DRL switch is in the daytime
running lights position, then pressing
and holding the HIGH BEAM button to
turn the high beam on. It will remain on
as long as the button is held in and will
turn off as soon as the button is
released.
Note:
A lighting on/off switch is not fitted
to this model. The position light,
rear light and licence plate light all
function automatically when the
ignition is turned to the ON position.
The headlight will function when
the ignition switch is turned to the
ON position.
89

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents