MAINTENANCE
146
Coolant Level Inspection
Note
The coolant level should be checked
when the engine is cold (at room or
ambient temperature).
cjxo
1.
Expansion tank
2.
Filler cap
3.
MAX mark
4.
MIN mark
To inspect the coolant level:
Position the motorcycle on level
▼
ground and in an upright position.
The expansion tank can be viewed
from the left hand side of the
motorcycle, below and towards the
front of the fuel tank.
Check the coolant level in the
▼
expansion tank. The coolant level
must be between the MAX and MIN
marks.
If the coolant is below the minimum
▼
level, the coolant level must be
adjusted.
2
3
4
Coolant Level Adjustment
Do not remove the expansion tank or
radiator pressure cap when the engine
is hot.
When the engine is hot, the coolant
inside the radiator will be hot and also
under pressure.
1
Contact with this hot, pressurized
coolant will cause scalds and skin
damage.
If
hard
cooling system, it will cause scale
accumulation
radiator and considerably reduce the
efficiency of the cooling system.
Reduced cooling system efficiency
may cause the engine to overheat and
suffer severe damage.
cjxo
1.
Expansion tank
2.
Filler cap
3.
MAX mark
4.
MIN mark
Warning
Caution
water
is
used
in
the
engine
2
3
4
in
the
and
1