Coolant Level Adjustment - Triumph Street Triple S Owner's Handbook Manual

Coolant Level Adjustment

Warning
Do not remove the expansion tank or
radiator pressure cap when the engine
is hot. When the engine is hot, the
coolant inside the radiator will be hot
and also under pressure. Contact with
this hot, pressurised coolant will cause
scalds and skin damage.
2
cjxo
1. Expansion tank
2. Filler cap
3. MAX mark
4. MIN mark
Allow the engine to cool.
The expansion tank cap can be removed
from the left
motorcycle.
Remove the cap from the expansion
tank and add coolant mixture through
the filler opening until the level reaches
the MAX mark. Refit the cap.
1
3
4
hand side of
Note:
• If the coolant level is being checked
because the coolant has overheated,
also check the level in the radiator
and top up if necessary.
• In an emergency, distilled water
can be added to the cooling system.
However, the coolant must then be
drained and replenished with HD4X
Hybrid OAT coolant as soon as
possible.
If hard water is used in the cooling
system, it will cause scale accumulation
in the
considerably reduce the efficiency of
the cooling system. Reduced cooling
system efficiency
engine to overheat and suffer severe
damage.
the
Maintenance
Caution
engine and radiator,
may
and
cause the
135