Coolant Level Inspection - Triumph Bonneville T100 Owner's Handbook Manual

MAINTENANCE AND ADJUSTMENT
104
If coolant
inhibitor is not used, the cooling system
will accumulate rust and scale in the
water jacket and radiator. This will block
the coolant passages, and considerably
reduce the efficiency of the cooling
system.

Coolant Level Inspection

The coolant level should be checked
when the engine is cold (at room or
ambient temperature).
Bonneville T100 (all models),
Bonneville T120 (all models) and
Speed Twin 900
1
1. Expansion tank cap
2. MAX and MIN marks
To inspect the coolant level:
Position the motorcycle on level
▼
ground and in an upright position.
The expansion tank can be viewed
from the left hand side of the
motorcycle, towards the rear of the
engine.
Check the coolant level in the
▼
expansion tank. The coolant level
must be between the MAX and MIN
marks. If the coolant is below the
minimum level, the coolant level
must be adjusted.
containing a corrosion
2
Scrambler 900
1
cjyr
1. Expansion tank cap
2. MAX mark
3. MIN mark
To inspect the coolant level:
Position the motorcycle on level
▼
ground and in an upright position.
The expansion tank can be viewed
from the left hand side of the
motorcycle, towards the rear of the
engine.
Check the coolant level in the
▼
expansion tank. The coolant level
must be between the MAX and MIN
marks. If the coolant is below the
minimum level, the coolant level
must be adjusted.
Speed Twin 1200 and Thruxton RS
1
2
1. Expansion tank cap
2. MAX and MIN marks
2
3