Rear Suspension Setting Chart; Rear Suspension Unit Preload Adjustment - Triumph Street Triple S Owner's Handbook Manual

Maintenance

Rear Suspension Setting Chart

Street Triple R - LRH (Low Ride
Height)
Rear
Loading
Solo Riding Track
Sport
Road
Comfort
Rider and Passenger
Number of adjuster turns anti-clockwise from the
1
fully clockwise position.
Note:
• This chart is only a guide. Setting
requirements may vary for rider
weight and personal preferences.
See the following
information regarding suspension
adjustment.
160
Spring Compression
Pre-Load Damping
1
Min 0.25
Min 0.75
Min 2
Min 2.75
Max 0.25
pages
Rear Suspension Unit Preload
Adjustment
Street Triple R - LRH (Low Ride
Height)
To change the rear suspension spring
preload setting, insert the adjustment
tool supplied in the tool kit into the slot
in the adjuster ring. Turn the adjuster
ring anticlockwise to increase spring
preload, and clockwise to decrease
spring preload. When delivered from the
factory, the preload adjuster will be set
to the Road position as shown in the
suggested suspension settings chart.
for
2
1. Peg
2. Position 1 (minimum adjustment)
3. Adjustment tool
Adjuster settings are counted from
position one with position one being
with the adjuster turned fully clockwise.
Position one gives the minimum amount
of spring preload.
Note:
• The motorcycle is delivered from
the factory with the preload and
compression damping adjusters set
at Road, as shown in the relevant
suspension chart, see page 160.
1
3