Coolant Level Inspection; Coolant Level Adjustment - Triumph Trident Owner's Handbook Manual

Coolant Level Inspection

Note
The coolant level should be checked
when the engine is cold (at room or
ambient temperature).
1
1. Expansion tank cover
2. Expansion tank
3. MAX mark
4. MIN mark
To inspect the coolant level:
▼ Position the motorcycle on level
ground and in an upright position.
The expansion tank can be viewed
from the left hand side of the
motorcycle, below and towards the
front of the fuel tank.
▼ Check the coolant
expansion tank. The coolant level
must be between the MAX and MIN
marks.
▼ If the coolant is below the minimum
level, the coolant level must be
adjusted.

Coolant Level Adjustment

Do not remove the expansion tank or
radiator
engine is hot.
When the engine is hot, the coolant
inside the radiator will be hot and also
under pressure.
Contact with this hot, pressurized
2
coolant will cause scalds and skin
3
damage.
4
If hard water is used in the cooling
system,
accumulation
radiator and considerably reduce the
efficiency of the cooling system.
Reduced cooling system efficiency
may cause the engine to overheat and
suffer severe damage.
level in the
1. Expansion tank cap
2. Expansion tank cover
3. Expansion tank
4. MAX mark
5. MIN mark
MAINTENANCE
Warning
pressure cap when
Caution
it will cause
in the engine
1
2
107
the
scale
and
3
4
5