Coolant Level Inspection; Coolant Level Adjustment - Triumph Tiger XR Owner's Handbook Manual

Note:
• HD4X Hybrid
supplied by Triumph, is premixed
and does not need to be diluted
prior to filling or topping off the
cooling system.

Coolant Level Inspection

Note:
• The coolant level should be checked
when the engine is cold (at room or
ambient temperature).
2
3
1. Expansion tank
2. MAX mark
3. MIN mark
Position the motorcycle on level ground
and in an upright
expansion tank can be viewed from the
right hand side of the motorcycle, below
and towards the front of the fuel tank.
Check the coolant level in the expansion
tank. The coolant level must be between
the MAX and MIN marks. If the coolant
is below the minimum level, the coolant
level must be adjusted.
OAT coolant, as
1
position. The

Coolant Level Adjustment

Warning
Do not remove the expansion tank or
radiator pressure cap when the engine
is hot. When the engine is hot, the
coolant inside the radiator will be hot
and also under pressure. Contact with
this hot, pressurized coolant will cause
scalds and skin damage.
1
1. Expansion tank
removed for clarity)
2. Expansion tank cap
Allow the engine to cool.
The expansion tank cap can be removed
from the right hand side of the
motorcycle, between the front of the
fuel tank and the frame.
Remove the cap from the expansion
tank and add coolant mixture through
the filler opening until the level reaches
the MAX mark. Reinstall the cap.
Maintenance
2
(fuel tank shown
119