Maintenance
Battery Installation
Warning
Ensure that the battery terminals do
not touch the motorcycle frame as this
may cause a short circuit or spark,
which would ignite battery gases
causing a risk of personal injury.
Position the battery into its housing.
1
cjws
1.
Battery
2.
Positive (red) terminal
3.
Negative (black) terminal
4.
Battery strap
Reconnect the battery, positive (red) lead
first and tighten the battery terminals to
4.5 Nm.
Apply a light coat of grease to the
terminals to prevent corrosion.
Cover the positive terminal with the
protective cap.
Refit the battery strap.
Refit the rider's and passenger's seat.
172
Fuse Box
2
4
1.
2.
The fuse boxes are located underneath
the rider's seat.
To allow access to the fuse boxes,
remove the rider's seat, see page 96.
3
cjwu
Fuse box
Main fuse (30 Amp)
Warning
Always replace blown fuses with new
ones of the correct rating (as specified
on the fuse box cover) and never use a
fuse of higher rating. Use of an
incorrect
fuse
electrical
problem,
motorcycle damage, loss of motorcycle
control and an accident.
1
2
could
lead
to
resulting
an
in