Maintenance
Front Suspension Rebound and
Compression Damping Adjustment
Street Triple R, Street Triple R - LRH
(Low Ride Height)
1.
Compression damping adjuster (COM)
2.
Rebound damping adjuster (TEN)
The rebound and compression damping
adjusters are located at the top of the
right hand fork.
To change the rebound damping setting,
rotate
the
TEN
clockwise to increase, or anticlockwise
to decrease.
To change the compression damping
setting, rotate the COM slotted adjuster
clockwise to increase, or anticlockwise
to decrease.
Always count the number of turns from
the fully clockwise position.
Note:
•
The motorcycle is delivered from
the factory with the rebound and
compression damping adjusters set
at the Road settings, as shown in
the relevant suspension chart, see
page 154 for Street Triple R or
page 155 for Street Triple R - LRH
(Low Ride Height).
156
slotted
adjuster
Rear Suspension settings
Warning
Ensure
that
the
between front and rear suspension is
maintained.
Suspension
could significantly change handling
characteristics
control and an accident. Refer to the
front and rear suspension setting
chart(s) for further information or
consult your dealer.
The
standard
provide a comfortable ride and good
handling characteristics for general, solo
riding. The chart(s) show suggested
settings for the rear suspension.
Note:
•
The motorcycle is delivered from
the factory with the suspension set
at
the
standard
settings, as shown in the relevant
suspension chart.
correct
balance
imbalance
leading
to
loss
suspension
settings
Road
(solo)
of