Triumph Street Triple S Owner's Handbook Manual page 24

Instruments
Traction Control (TC) Indicator Light
The TC indicator light is used to
indicate that
system is active and is working to limit
rear wheel slip during periods of hard
acceleration or under wet or slippery
road conditions.
Warning
If the traction
functioning, care must be taken when
accelerating and cornering on wet/
slippery road surfaces to avoid rear
wheel spin. Do not continue to ride for
longer than is necessary with the
Engine Management
Malfunction Indicator Light (MIL) and
traction control
illuminated. Contact
Triumph dealer as soon as possible to
have the fault checked.
Hard acceleration and cornering in this
situation may cause the rear wheel to
spin resulting in loss of motorcycle
control and an accident.
TC Indicator Light Operation:
TC Switched On:
• Under normal riding conditions the
indicator light will remain off.
• The indicator light will flash rapidly
when the traction control system is
working to limit rear wheel slip
during periods of hard acceleration
or under wet or slippery road
conditions.
24
the traction control
control is
System
warning
an authorised
TC Switched Off:
The indicator light will not illuminate.
Instead the TC disabled warning light
will be illuminated (see page 24).
Note:
• Traction control will not function if
there is a malfunction with the ABS
system. The warning lights for the
ABS, traction control and the MIL
will be illuminated.
not
Traction Control (TC) Disabled
Warning Light
should not illuminate unless traction
control is switched off or there is a
lights
malfunction.
If the warning light becomes illuminated
at any other time while riding, it
indicates
system has a malfunction that requires
investigation.
Direction Indicators
turned to the left or right, the indicator
warning light will flash on and off at the
same speed as the direction indicators.
The TC disabled warning light
that the traction
When the indicator switch is
control