Triumph Street Triple S Owner's Handbook Manual page 34

Instruments
Note:
• The riding mode will default to
ROAD when the ignition is switched
ON, if the TRACK or RIDER Mode
was active the last time the ignition
was switched OFF with ABS or TC
set to TRACK or OFF in either of
those modes.
• Otherwise, the last selected riding
mode will be remembered and
activated when the ignition is
switched ON.
• If the mode icons are not visible
when the ignition switch is in the
ON position, ensure the engine stop
switch is in the RUN position.
The current riding mode is displayed in
the upper left of the display screen.
To select a riding mode, press and
release the MODE button on the left
hand switch housing to activate the
riding mode selection tray at the bottom
of the display screen.
The currently active riding mode icon is
highlighted with a blue background.
To change the selected riding mode,
either press the joystick left or right, or
repeatedly press the MODE button until
the required mode is in the centre of
the display screen, highlighted with an
arrow above it.
34
A brief press of the joystick centre will
select the desired riding mode, and the
icon in the upper left of the display
screen will change.
3
F
1
o7:29
PM
12.5
E
TRIP
m
1
3
cjww
1. Mode button
2. New riding mode
3. Current riding mode
Further left/right presses of the joystick
or MODE button will scroll through the
riding modes in the following order:
• RAIN
• ROAD
• SPORT
• TRACK (Street Triple RS only)
• RIDER
The selected mode is activated once the
following conditions for switching modes
have been met:
Motorcycle Stationary - Engine Off
• The ignition is switched ON
• The engine stop switch is in the
RUN position.
Motorcycle Stationary - Engine Running
• Neutral gear is selected or the
clutch is pulled in.
1 2 3 4 5 6
10
8
6
mph
4
9999 02:25 25.2
mi HH:MM mp/h
TO SELECT
2
12 14
RPM
x1000
N
2 0