Trip Meter - Triumph Street Triple S Owner's Handbook Manual

Tyre Pressure Units - only if TPMS
is fitted
5
6
1. TPMS symbol
2. Front tyre indicator
3. Rear tyre indicator
4. Tyre pressure display
5. Scroll button
6. Set button
To access the tyre pressure display,
turn the ignition to the ON position.
Press and release the SCROLL button
until SEtUP is shown in the display
screen.
Press and release the SET button.
Press and release the SCROLL button
until UnitS is shown in the display
screen.
Press and release the SET button to
select the pressure display.
Press and release the SCROLL button to
scroll between BAR or PSI.
Press and release the SET button to
select either BAR or PSI.
When the tyre pressure monitoring
system has been selected, —— PSI or
bAR will be shown in the display screen
until the motorcycle is travelling at a
speed greater than 12 mph (20 km) and
the tyre pressure signal is received.
1 2 3
4
To exit the tyre pressure display, press
and release the SCROLL button until
REtURn is displayed.
Press and release the SET button to
return to the TRIP screen
Return
Select REtURn to return to the main
display.

Trip Meter

1. Trip meter display
Warning
Do not attempt to switch between trip
meter display modes or reset the trip
meter with the motorcycle in motion as
this may lead to loss of motorcycle
control and an accident.
Instruments
1
71