Triumph Street Triple S Owner's Handbook Manual page 72

Instruments
To access the trip meter information
press and release the TRIP button on
the left handlebar switch housing until
the desired display is shown.
1
cjxy
1. TRIP button
The display will scroll through in the
following order:
• Journey time
• Average fuel consumption
• Instantaneous fuel consumption
• Average speed
• Odometer
• Front Tyre Pressure Display
(if TPMS is fitted)
• Rear Tyre Pressure Display
(if TPMS is fitted)
• Journey distance
• Range to empty.
Each display provides the following
information all calculated since the trip
meter was last reset to zero:
Journey Time
The total time elapsed.
Average Fuel Consumption
An indication of the average fuel
consumption. After being reset the
display will show dashes until 0.1 miles/
km has been covered.
72
Instantaneous Fuel Consumption
An indication of the fuel consumption at
an instant in time.
Average Speed
The average speed is calculated from
when the trip computer was last reset.
After being reset the display will show
dashes until 1 mile/km has been covered.
Odometer
The odometer shows the total distance
that the motorcycle has travelled.
Front Tyre Pressure Display
Displays the current front tyre pressure.
Rear Tyre Pressure Display
Displays the current rear tyre pressure.
Journey Distance
The total journey distance travelled.
Range to Empty
This is an indication of the predicted
distance that can be travelled on the
remaining fuel in the tank.
Trip Meter Reset
To reset the trip meter, select and
display the trip meter then press the
TRIP button for one second. After one
second, the trip meter will reset to zero.
Note:
• When the trip meter is reset to
zero, the journey time, average fuel
consumption and average speed will
also be set to zero.