Rear Suspension Unit Preload Adjustment - Triumph Street Triple S Owner's Handbook Manual

Maintenance
Rear Suspension Unit Preload
Adjustment
Street Triple S and Street Triple S
660cc
The rear suspension unit is adjustable
for preload.
To change the preload setting, insert
the adjustment tool supplied in the tool
kit into the slot in the adjuster ring.
Turn the adjuster ring anticlockwise to
increase spring preload, and clockwise
to decrease spring
delivered from the factory, the preload
adjuster will be set to the Solo Riding
position as shown in the suggested
suspension settings chart.
2
cjxi
1. Peg
2. Position 1 (minimum adjustment)
3. Adjustment tool
162
preload. When
1
3
Adjuster settings are counted from
position one with position one being
with the adjuster turned fully clockwise.
Position one gives the minimum amount
of spring preload.
Note:
• The motorcycle is delivered from
the factory
adjuster set at minimum, as shown
in the relevant suspension chart,
see page 161.
with the preload