Triumph Street Triple S Owner's Handbook Manual page 45

Bike Set Up - Service
The service interval is set to a distance
and/or time period.
To review the service interval:
• Push the HOME button to display
the MAIN MENU.
• Push joystick down and then press
joystick centre to select BIKE SET
UP.
• Push joystick
SERVICE.
• Push joystick centre to display the
SERVICE information.
BIKE SET UP
INDICATORS
SERVICE
down to select
SERVICE
5450 mi
01-01-2017 (335 DAYS)
EXIT
Trip Setup
This menu allows configuration of the
Trip Meters.
Three options are available:
• TRIP 1 RESET
• TRIP 2 RESET
• TRIP 2 DISPLAY
Each Trip Meter can be configured to be
reset either manually or automatically.
The setup procedure is the same for
both trips.
Trip 2 can be enabled or disabled. If trip
2 is disabled it will no longer be visible in
the information tray.
Manual reset will only reset the selected
trip meter when the rider chooses to do
so. To reset the trip see page 38.
Automatic reset will reset each trip
meter after the ignition has been
switched off for a set time.
To set the trip meters to reset manually,
see page 46.
To set the trip
automatically, see page 46.
To enable or disable trip 2 see page 47.
Instruments
meters to reset
45