Suspension Adjustment; Front Suspension Settings - Triumph Street Triple S Owner's Handbook Manual

Maintenance
Inspecting the Steering (Headstock)
Bearings for Free Play
Inspecting the Steering for Free Play
Inspection
Position the motorcycle on level ground,
in an upright position.
Raise the front wheel above the ground
and support the motorcycle.
Standing at the front of the motorcycle,
hold the lower end of the front forks
outer tube and try to move them
forward and backward.
If any free play can be detected in the
steering (headstock) bearings, ask your
authorised Triumph dealer to inspect
and rectify any faults before riding.
Warning
Riding the motorcycle with incorrectly
adjusted or
(headstock) bearings is dangerous and
may cause loss of motorcycle control
and an accident.
Remove the support and place the
motorcycle on the side stand.
152
defective steering

Suspension Adjustment

Front Suspension Settings

Warning
Make sure that the correct balance
between front and rear suspension is
maintained. Suspension imbalance could
significantly
characteristics leading to loss of control
and an accident. Refer to the table(s)
for further information or consult your
authorised Triumph dealer.
The standard
provides a comfortable ride and good
handling characteristics for general, solo
riding. The chart(s) shows suggested
settings for the front suspension.
Note:
• The motorcycle is delivered from
the factory with the suspension set
at the standard
settings, as shown in the relevant
suspension chart.
change handling
suspension setting
Road (solo)