The bar end mirrors will be set by your
authorised Triumph dealer and will not
normally require any adjustment. Should
adjustment be necessary, do not rotate
the mirror beyond 75°, measured from
the vertical section of the mirror arm.
1.
Mirror arm vertical section
1
75°
Suspension and Steering
Inspection
Steering/Wheel Bearings
Warning
To prevent risk of injury from the
motorcycle falling during the inspection,
make sure that the motorcycle is
stabilised and secured on a suitable
support.
Do not exert extreme force against
each
wheel
or
vigorously as this may cause the
motorcycle to become unstable and
cause injury by falling from its support.
Make sure that the position of the
support block will not cause damage to
the motorcycle.
Maintenance
rock
each
wheel
149