Seats; Seat Care; Rider's Seat - Triumph Street Triple S Owner's Handbook Manual

General Information

Seats

Seat Care

Caution
To prevent damage to the seat or seat
cover, care must be taken not to drop
the seat. Do not lean the seat against
the motorcycle or any surface which
may damage the seat or seat cover.
Instead, place the seat, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seat
which may cause damage or staining
to the seat cover.
184
See page
information.
96
for seat cleaning

Rider's Seat

cjxd
1. Rider's seat fixing
To remove the rider's seat, remove the
passenger seat or seat cowl (see
page 97).
Remove the fixing located to the rear of
the padding. This will allow the rider's
seat to slide up and rearwards for
complete removal from the motorcycle.
To refit the seat, engage the seat's
tongue under the fuel tank, fit and
tighten the fixing to 9 Nm. Refit the
passenger seat or seat cowl (see
page 97).
Warning
The rider's seat is only correctly
retained and supported once the fixing
is correctly tightened. Never ride the
motorcycle with the fixing loose or
removed, as the rider's seat will not be
secure and may move.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
1