1-4. Removing/Reattaching the Cabinets
1-4-1. Top Cover Assembly
Removal
1. Remove the two screws (B3 x 6), and remove the
upper panel assembly in the direction of the arrow.
2. Remove the seven screws (PSW3 x 6), and lift the top
cover assembly.
3. Disconnect the harness from the connector CN109 on
the PS-686 board.
Upper panel assembly
PSW3 x 6
Top cover
assembly
Installation
4. Reattach the top cover assembly in the reverse order of
steps 1 to 3.
PCS-G70N/G70NP/G70NP2
PCS-G70S/G70SP
B3 x 6
B3 x 6
PSW3 x 6
PS-686 board
CN109
1-4-2. Side Panel and Lower Panel Assembly
Removal
1. Remove each screw from both the right and the left
sides, and remove each side panel in the direction of
the arrow.
2. Remove the two screws, and remove the lower panel
assembly in the direction of the arrow.
B3 x 6
Lower panel assembly
Installation
3. Reattach the side panels and the lower panel assembly
in the reverse order of steps 1 and 2.
Side panel (L)
Side panel (R)
B3 x 6
B3 x 6
B3 x 6
1-3 (E)