Chapter 3: Basic Connection; Starting A Connection By Calling A Remote Party; Turning On The Power - Sony Ipela PCS-XC1 Operating Instructions Manual

Chapter 3: Basic
Connection
This chapter describes how to connect to a remote party after the administrator
has completed various registrations and settings for the system.
The chapter explains point-to-point communications via LAN or SIP
connections.
For use of optional equipment, see Chapter 4.
To conduct an encrypted communication, see Chapter 5.
Starting a Connection by Calling a
Remote Party
You can start a communication with a remote party by dialing. Once you have
made a connection to the remote party, you can begin talking just as with a
normal phone call and start communication.
You can call a remote party using the various methods described below. Use
any one depending on the settings in the Home menu or connecting status.
• To call a remote party by using the Connect menu (page 80)
• To call a remote party by entering their address or number directly (Direct
Dial) (page 81)
• To call a remote party by using the one-touch dial buttons (page 83)
• To call a remote party by using the history list (page 84)
• To call a remote party registered in the Phone Book (page 85)
• To call a remote party not registered in the Phone Book by setting the
necessary items in the Detailed Dial menu (page 87)

Turning On the Power

1
Turn on the TV monitor.
2
Turn on other equipment you are using for the communication.
3
Press the 1 (power) switch on the unit to turn it on.

Starting a Connection by Calling a Remote Party

79